PRODUCTS
應用 Application:
橫向伸縮接頭的用途在于吸收軸直角方向的變位量幽鹏,裝置時應與管線位移成90度垂直治力,又為維持其正常動作,勿任意調整或移動螺絲。
Universal expansion joint should be installed offset to absorb the movement. When installed, it must be at the fully extended length and at 90° to the movement. The tie rods can’t be adjusted or removed to ensure the proper functioning of the unite.
產品規格表 Specification:
口徑 Nominal Bore | 總長度 OAL | 位移量 Movement | 工作壓力 Working Pressure kg/cm2 | |||
mm | ins | mm | 軸向mm | 橫向mm | EH-810 | EH-810H |
50 | 2 | 350 | ±5 | ±50 | 10 | 16 |
65 | 11/4 | 400 | ±5 | ±50 | 10 | 16 |
80 | 3 | 400 | ±5 | ±50 | 10 | 16 |
100 | 4 | 500 | ±5 | ±50 | 10 | 16 |
125 | 5 | 600 | ±5 | ±50 | 10 | 16 |
150 | 6 | 600 | ±5 | ±50 | 10 | 16 |
200 | 8 | 700 | ±5 | ±50 | 10 | 16 |
250 | 10 | 700 | ±5 | ±50 | 10 | 16 |
300 | 12 | 700 | ±5 | ±50 | 10 | 16 |
350 | 14 | 700 | ±5 | ±50 | 10 | 16 |
400 | 16 | 700 | ±5 | ±50 | 10 | 16 |
500 | 20 | 800 | ±5 | ±50 | 10 | 16 |
600 | 24 | 800 | ±5 | ±50 | 10 | 16 |
1. 工作壓力與表中規格不同可以另行制作。
2. 法蘭標準:JIS/ ANSI/ DIN/ B.S./ JB等標準制作。